User's Manual
Table Of Contents
- Copyright Notice
- Table of Contents
- 1 | Introduction
- 2 | Setup for Windows Mobile
- 3 | Setup for Palm OS
- 4 | Setup for Windows 98SE/Me/2000/XP
- 5 | Setup for Windows XP Tablet Edition
- 6 | Setup for Mac OS X
- Appendix A Specifications
- Appendix B Network Information
- Appendix C Manual Dial-up Connection Setup
- Appendix D Advanced Software Installation
- Appendix E Faxing
- Appendix F Technical Support
- Limited Warranty
- Regulatory Compliance
Windows Mobile 2003/2003SE: You can use either of two methods.
METHOD 1: Tap on the Connection Icon
1. If you did not install Connect!Agent
, refer to the OPTIONAL section at
the end of this chapter to manually create a Bluetooth connection. Make
sure the Bluetooth radio of your Pocket PC is turned on.
2. Make sure the modem is turned on.
3. Tap on the Connection icon (two arrows) at the top of the screen. It
should have an “X” to show that you are not connected.
4. A bubble should appear with the dial-up connection you just created for
the Cordless 56K Modem. Tap on the phone number.
Note: Multiple connections may be listed. If the Cordless 56K Modem
connection is not listed, tap on the Settings link in the bubble. Tap
Manage Existing Connections. Select the connection. Tap ok.
5. If you installed Connect!Agent, it will begin searching for the Socket
Cordless 56K Modem. After Connect!Agent finds the modem, the
Bluetooth Passkey screen will appear. Enter the passkey from a sticker
on the back on the modem.
Note: After a successful connection, Socket Connect!Agent will save the
device and passkey information, so future connections will be automatic.
22