User's Manual
Table Of Contents
- Copyright Notice
- Table of Contents
- 1 | Introduction
- 2 | Setup for Windows Mobile
- 3 | Setup for Palm OS
- 4 | Setup for Windows 98SE/Me/2000/XP
- 5 | Setup for Windows XP Tablet Edition
- 6 | Setup for Mac OS X
- Appendix A Specifications
- Appendix BNetwork Information
- Appendix CManual Dial-up Connection Setup
- Appendix DAdvanced Software Installation
- Appendix EFaxing
- Appendix FTechnical Support
- Limited Warranty
- Regulatory Compliance
STEP 1: Charge the Modem
If you have the battery-powered version of the modem and want to run it on
batteries, use the included AC adapter to charge the modem. It may take up
to four hours to reach full charge.
The Battery Charging Status LED will be red when the battery is
less than 90% charged, and green when at least 90% charged.
STEP 2: Prepare Dial-up Information
Obtain the following information from your network administrator or ISP.
Dial-up number: (_____) _______________________________
User name: __________________________________________
Password: ___________________________________________
ADVANCED USERS: To perform an advanced setup, you may want to use
the Network Information Form in Appendix B.
36