User's Manual
Table Of Contents
- Copyright Notice
- Table of Contents
- 1 | Introduction
- 2 | Setup for Windows Mobile
- 3 | Setup for Palm OS
- 4 | Setup for Windows 98SE/Me/2000/XP
- 5 | Setup for Windows XP Tablet Edition
- 6 | Setup for Mac OS X
- Appendix A Specifications
- Appendix B Network Information
- Appendix C Manual Dial-up Connection Setup
- Appendix D Advanced Software Installation
- Appendix E Faxing
- Appendix F Technical Support
- Limited Warranty
- Regulatory Compliance
6. In the next screen, enter the dial-up number exactly how it should be dialed.
You can enter the number without any spaces or dashes.
Note: If you plan to use the connection in different areas, tap use dialing rules
to set up dialing locations. Refer to the Pocket PC manual for instructions.
2. In the next screen, enter the User name and Password for your network
account. Tap Advanced.
7. In the next screen, select the following:
• Baud rate: 57600.
• Wait for dial tone before dialing: Checked.
If you DO NOT need to enter any IP addresses, tap ok.
If you DO need to enter IP addresses, tap on the TCP/IP and Servers tabs
to do so. Tap ok.
8. In the last screen, tap Finish.
68 | APPENDIX C: MANUAL DIAL-UP CONNECTION SETUP