Quick Start Guide

11
STEP 4: Dial-up Networking
Before setting up dial-up networking, prepare yourself with dial-up
information and other necessary settings for your office network or ISP.
1. Pocket PC — Go to Start | Settings | Connections | Modems. In the next
screen, tap New Connection…
Pocket PC 2002 — Go to Start | Settings | Connections | Connections. In
the top field, select Internet Settings. Tap Modify… Tap New…
For help setting up dial-up networking, refer to the section for creating
an ISP or network connection in your Pocket PC 2002’s user guide.
HPC — Go to Start | Programs | Communication | Remote Networking |
Make New Connection.
2. In the next screen(s), enter a name for the dial-up connection and select
Bluetooth Phone for the modem.
On a Pocket PC, tap Advanced… or on a HPC, tap Configure…
3. In the Port Settings screen, for Flow Control, select None. Enter any
necessary settings for the network or ISP. On a Pocket PC, tap OK.
4. Complete the process for setting up the connection. When prompted, be
sure to uncheck Wait for dial tone before dialing (this will be in the Call
Options screen for HPCs). Enter dial-up information and any other
necessary settings for your office network or ISP. When done, tap Finish.