Quick Start Guide

12
5. Now you are ready to start the connection.
Pocket PC — Go to Start | Programs | Connections. Tap on the Bluetooth
connection you just set up. Make sure the correct dialing information is
entered, then tap Connect.
Pocket PC 2002 — When you return to the Connections screen, under
Internet Settings, tap Connect. In the next screen, make sure the correct
dialing information is entered. Tap OK.
HPC — Go to Start | Control Panel | Remote Networking. Tap on the
Bluetooth connection you just set up. Make sure the correct dialing
information is entered, then tap Connect.
6. FOR MOTOROLA TIMEPORT 270C ONLY:
After you tap Connect for the first time, the phone will display a message
asking if you want to bond. Enter YES. Make up a 4-8 digit passkey,
enter it on the phone, then enter it on the mobile computer.
After successfully bonding, you can set up the phone for automatic
connections.
Automatic Connections for Motorola
:
On the phone, press MENU.
Scroll to Settings, then press SELECT.
Scroll to Connection, then press ON.
On Bluetooth Link, press SELECT.
Scroll to Devices, then press SELECT.
Choose your mobile computer, then press EDIT.
Scroll to Access:Ask, then press CHANGE.
Scroll to Automatic, then press SELECT. Press DONE.
7. To use a different Bluetooth phone for dial-up networking, you can use
the same connection setup, but you must make the new phone your
favorite. Just run the Get Connected! Wizard again, select the new phone,
and make it your new Favorite when prompted. Or you can use the
Bluetooth Devices folder to change your favorite phone (see page 16).