Quick Start Guide

18
OPTIONAL: Bond with Discovered Device(s)
Follow these steps to bond with an already discovered Bluetooth device. In
most cases, bonding is for establishing secure communications with a
Bluetooth-enabled phone. This is a more detailed alternative to using the
Bluetooth “Get Connected! Wizard.”
Important!
• Do NOT attempt bonding with a Motorola Timeport 270C phone
!
• Do NOT use this method to bond with a printer. The printing software
included on the installation CD handles the bonding process separately.
1. In the Bluetooth Devices folder, tap and hold your stylus on the
Bluetooth device you want to bond with. In the pop-up menu, select
Bond.
2. Alternatively, after selecting a device, tap on the Bond icon
.
Or tap on Device, then select Bond.
3. The Bluetooth Device Bonding Wizard will launch. Follow the wizard to
bond with your selected device. As prompted, make sure the Bluetooth
device that you want to bond with is in Bondable
mode.
4. If the remote device is set up to accept bonding, a Bluetooth Passkey
screen will appear. To continue bonding, enter the correct passkey and
tap Reply.
5. When you have successfully bonded with the other device, tap Finish.