Quick Start Guide

OPTIONAL: Install and Use the Dialer

The dialer lets you dial a number directly from your Contacts list.

Installing the Dialer

If you have not already installed the dialer, follow these steps to do so:

1. Make an active partnership between the mobile computer and a host PC.

Use a serial/USB/Ethernet cable or cradle.

2. Insert the Socket Bluetooth Card Installation CD into the host PC.

3. Go to My Computer and browse the installation CD for the Dialer Installer

folder. Inside the folder, run the SETUP.EXE file.

4. Follow the instructions on your screen until installation is done.

5. Disconnect the mobile computer from your host computer. Soft reset the

mobile computer.

Assigning a Dialing Prefix

If you have not already assigned a dialing prefix, follow these steps to do so:

1. Go to Start | Settings | System. Tap on the Socket Dialer icon.

2. Select the appropriate Dialing Prefix, then tap ok.

Using the Dialer

1. To use the dialer, the mobile computer must already be connected to the

Bluetooth phone. You can use the Get Connected! Wizard to do this.

2. Go to Start | Contacts.

3. Tap and hold your stylus on the contact you wish to dial. In the pop-up

menu, select Dial Contact. Or, tap on Tools and select Dial Contact.