User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | General Installation
- 3 | Dial-up Networking
- 4 | Bluetooth ActiveSync and LAN Access
- 5 | Socket OBEX
- 6 | Socket Dialer
- 7 | Bluetooth Serial Port
- 8 | Bluetooth Faxing and Printing
- 9 | My Device Manager
- 10 | Bluetooth Devices Folder
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Troubleshooting
- Appendix D Technical Support
- Limited Warranty
- Regulatory Compliance
Send a Contact
1. Make sure the other Bluetooth enabled device is set up to receive a
contact. It must support the OBEX Object Push server profile. Refer to
the documentation that came with the device for instructions.
IMPORTANT! If the other device is not set up to
receive a contact, you will not be able to send it a
contact!
Note: If the other device is also using the Socket Bluetooth Connection
Kit, you can set it up to receive a contact by tapping the Bluetooth
icon. In the pop-up menu, tap Transfer via Bluetooth | Receive Contact
or File.
2. Now you are ready to send a contact. Go to your Contacts folder.Tap
and hold your stylus on the contact(s) you would like to send. In the
pop-up menu, select Send Via Bluetooth.
3. If your mobile computer has no devices saved to the Bluetooth Devices
Folder, then it will begin to search for Bluetooth enabled devices in
range.
46 | CHAPTER 5: SOCKET OBEX