User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | General Installation
- 3 | Dial-up Networking
- 4 | Bluetooth ActiveSync and LAN Access
- 5 | Socket OBEX
- 6 | Socket Dialer
- 7 | Bluetooth Serial Port
- 8 | Bluetooth Faxing and Printing
- 9 | My Device Manager
- 10 | Bluetooth Devices Folder
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Troubleshooting
- Appendix D Technical Support
- Limited Warranty
- Regulatory Compliance
Connect/Disconnect
To connect
to the remote device, do the following:
1. Make sure the remote device has file sharing enabled.
2. Start the connection process by either of two methods:
• Tap on the Device menu. Select Connect.
• Tap on the Connect icon .
3. In the next screen, select the device you wish to connect to. Tap Select.
Your mobile computer will attempt to connect to the device selected.
To disconnect
from the remote device, do the following:
1. Start the disconnection process by either of two methods:
Tap on the Device menu. Select Disconnect.
Tap on the Connect icon .
2. Your mobile computer will disconnect from the remote device.
Afterwards, no contents will be listed for the remote device.
Exit Bluetooth File Explorer
To exit the Bluetooth File Explorer, tap File | Exit.
CHAPTER 5: SOCKET OBEX | 55