User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | General Installation
- 3 | Dial-up Networking
- 4 | Bluetooth ActiveSync and LAN Access
- 5 | Socket OBEX
- 6 | Socket Dialer
- 7 | Bluetooth Serial Port
- 8 | Bluetooth Faxing and Printing
- 9 | My Device Manager
- 10 | Bluetooth Devices Folder
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Troubleshooting
- Appendix D Technical Support
- Limited Warranty
- Regulatory Compliance
4. If the remote device is set up to accept bonding, a Bluetooth Passkey screen
will appear. To continue bonding, enter the correct passkey and tap Reply.
If you are bonding with the Socket GPS Receiver, enter the passkey 0183.
5. The mobile computer will submit the passkey to the serial device.
6. When you have successfully bonded with the other device, tap Finish.
CHAPTER 8: BLUETOOTH SERIAL PORT | 69