User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Scanner Setup
- 3 | Setup for Windows PC
- 4 | Setup for Windows Mobile
- 5 | Setup for Apple
- 6 | Setup for Android
- 7 | Setup for BlackBerry
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Barcode Label Specifications
- Appendix D Decode Zone
- Appendix E Command Barcodes for CHS 7C
- Appendix F Command Barcodes for CHS 7E, 7M, 7P, 7NRx
- Appendix G Special Button Sequences
- Appendix H CAB Installation
- Appendix I Connection Barcodes
- Appendix J Troubleshooting
- Appendix K Technical Support
- Limited Warranty
- SocketScan Software License Agreement
- Regulatory Compliance
CHAPTER 3: SETUP FOR WINDOWS PC 19
OPTION 2: USING THE CHS IN SPP MODE
To install SocketScan 10 software and configure a COM port:
1. Access the SocketScan 10 installation file, either from the Socket website or the
SocketScan 10 installation CD.
• To install from a web download (recommended to ensure the latest software)
− Open: http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
− Click on the link for the exe file.
• To install from the SocketScan 10 installation CD:
− Insert the CD into the CD drive of your computer. It should auto-run.
(If the CD does not auto-run, use My Computer or File Explorer to access your CD
drive and click on setup.exe)
− In the Getting Started with SocketScan wizard, click on the Installation link on the
left side. Scroll down to the section for Windows Desktop and click Install.
2. Download and run the installation file.
• For Internet Explorer, in the Security Warning screens, click Run.