User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Scanner Setup
- 3 | Setup for Windows PC
- 4 | Setup for Windows Mobile
- 5 | Setup for Apple
- 6 | Setup for Android
- 7 | Setup for BlackBerry
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Barcode Label Specifications
- Appendix D Decode Zone
- Appendix E Command Barcodes for CHS 7C
- Appendix F Command Barcodes for CHS 7E, 7M, 7P, 7NRx
- Appendix G Special Button Sequences
- Appendix H CAB Installation
- Appendix I Connection Barcodes
- Appendix J Troubleshooting
- Appendix K Technical Support
- Limited Warranty
- SocketScan Software License Agreement
- Regulatory Compliance
CHAPTER 3: SETUP FOR WINDOWS PC 23
Bluetooth
Stack
Connection Instructions
Microsoft
(Windows 7)
1. Right-click on the Bluetooth icon
in the system tray (notification area). In
the pop-up menu, click Add a Device. A device search will begin.
2. In the device list, select Socket CHS [xxxxxx] and click Next.
3. If prompted, select Enter the device’s pairing code. Enter the passkey
0000 (four zeroes). Click Next.
4. Follow the remaining screens to complete the wizard.
Microsoft
(Windows
Vista / XP)
1. Right-click on the Bluetooth icon in the system tray (notification area). In
the pop-up menu, click Add a Bluetooth Device.
2. In the welcome screen, check the box My device is set up and ready to
be found. Click Next. A device search will begin.
3. In the device list, select Socket CHS [xxxxxx]. Click Next.
4. If prompted, select Use the passkey found in the documentation and
enter the passkey 0000 (four zeroes). Click Next.
5. Follow the remaining screens to complete the wizard.