User's Manual

CHAPTER 1: INTRODUCTION 9
Antimicrobial Protection (CHS 7NRx only)
The CHS 7NRx is made with antimicrobial materials to provide an extra layer of protection to the
device against the multiplication and spread of potentially harmful bacteria and microbes.
Socket recommends using Sani-Cloth® Plus brand disposable cloth wipes as the standard disinfectant
wipe for the CHS 7NRx. For more information about the wipes, please visit: http://www.pdipdi.com
Do not use a bleach-based or Dispatch® brand cloth wipes, as they negate all antimicrobial
properties that have been added to the device.
To clean the scanner window, use an eye lens cleaner or clean, soft cloth.
Status Indicator LED
LED LED Activity Meaning
Bluetooth (Blue) 1 blink per second Bluetooth radio is on but not connected
1 blink per 3 seconds CHS connected to host device
Good Read (Green) On
Data successfully scanned and transmitted to
host device
On and connected to charger Battery full
Battery (Red) Blinking 20% battery capacity remaining
Off Off or Good Battery status
Status Indicator Beeps
Beep Pattern Meaning
2 beeps (low-high) Power on
2 beeps (high-low) Power off
1 beep CHS connected to host device and ready to scan barcodes.
1 beep (low)
You have double-pressed the power button, and the CHS has
enabled support for simultaneous scanning and onscreen
keyboard entry for Apple iOS
1 beep with green LED (configurable
setting)
Data successfully scanned and sent to host device
2 beeps (same tone) CHS disconnected from host device
1 long beep
CHS unsuccessfully tried 30 times to connect to the last host
device it paired with. The CHS will become discoverable.
5 beeps
The CHS detects an internal fault, will reset and power off. If
connected to a host computer, the scanner will disconnect
during the reset.