User's Manual

STEP 5: Put on the CRS

You can put on the CRS either with or without the case. If you choose not to use the

case, the wrist unit will be more susceptible to abuse, specifically the plastic parts.

How to put on the CRS with the wrist unit case

1. Insert the wrist unit into the case. During insertion, you may hear a beep

because the wrist unit’s power button was pressed, however, the wrist

unit will not turn on unless the button was pressed for more than 2

seconds.

2. Use the cable to connect the CRS to the wrist unit. The white arrows of

the cable connectors should be on top.

3. Attach the finger strap to the bottom of the ring scanner.

4. Put on the wrist strap. Adjust it for a secure and comfortable fit.

5. Attach the wrist unit case to the wrist strap, by pressing the Velcro

together.

6. Put the ring scanner on your index finger, adjusting the finger strap for a

secure and comfortable fit.

How to put on the CRS without the wrist unit case

Note: After you stick the Velcro strips to the wrist unit, the wrist unit will no

longer fit in the case, unless the Velcro strips are removed.

1. Stick the 2 adhesive Velcro strips horizontally to the back of the

wrist unit. Do not space the strips too far apart. Note the size of the

Velcro on the wrist strap.