User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for Windows Mobile
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Bar Code Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
SYMPTOM: While scanning with the CRS, I turned off the Pocket
PC, or my Pocket PC entered suspend mode. Now my Pocket PC
won’t turn on again.
POSSIBLE REASONS SOLUTION
This is a known problem with the
Widcomm stack (built into HP
h221X iPAQ Pocket PCs with
ROM version 1.00).
Soft reset the Pocket PC by
pressing the reset button.
SYMPTOM: While scanning with the CRS, I turned off the host
device, or my host device entered suspend mode. Now the CRS
won’t reconnect to my host device.
POSSIBLE REASONS SOLUTION
There is a problem with the
Broadcom (Widcomm) stack on
some devices where the CRS
can be discovered but fails to
communicate. Affected units
include the HP iPAQ models
h221X with ROM version 1.10
and h1945.
Soft reset the Pocket PC by
pressing the reset button.
32 | APPENDIX F TROUBLESHOOTING