User's Manual

Automatic Reconnections

Each time you power on the reader, it will automatically try to

connect to the last device it was connected to.

• Make sure the device is in range with Bluetooth turned on.

• Pressing the trigger button will initiate the attempts to connect.

• If using Application Mode, make sure the Reader-enabled

Application is launched or running.

• If a connection is made, the blue light will stop blinking and turn

solid.

• If a connection is not made after several attempts, the reader will

emit a long beep (and the blue light will turn off).

• Press the trigger button to re-initiate the connection process.

BLUETOOTH RECONNECTION