User Guide
APPLICATION MODE
Connect to Apple iOS device in Application Mode
Please check with your scanner application vendor or visit
www.socketmobile.com/appstore to conrm your scanner-enabled
application supports the scanner.
If you are using the scanner with an Apple iOS device and a
scanner-enabled Application that does not provide instructions how to
connect your scanner, please use the following steps.
1. Power on the scanner. Make sure the scanner is discoverable (unpaired).
The Blue light should be blinking fast.
2. Scan the barcode to change the prole to Application Mode (MFI-SPP).
Use with iPad, iPod touch, and iPhones
(Print page to scan. Do not scan on screen.)
3. Turn on Bluetooth on the Apple device. Go to Settings > Bluetooth.
A Bluetooth Devices search will begin.
(Continue on next page)
16