User Guide

22
FACTORY RESET
Factory Reset will restore the SocketScan to Factory Default settings (con-
gured as shipped).
Scan this barcode
Or follow the Factory Reset manually:
1. Power ON the scanner.
2. Press and hold the scan button.
3. Tap the power button once while continuing to press the scan button.
4. Keep holding the scan button until you hear a beep and then release
(about15 seconds).
Your scanner will beep 5 times and power off.
Note: If you follow this sequence but release the scan button too early,
the Factory Reset will fail.
Quickly press and release
the power button
1
2