User Manual

3 | RFID Demo
This chapter shows how to use the Socket RFID Demo
application with the Socket CF RFID Reader Card to
perform the following:
• Read an RFID Tag.
• Enable Loop Mode.
• Select Tag Type.
• Advanced – Write to Tag.
Before you begin using the Socket RFID Demo application, make sure you
have done the following:
• Install the RFID Demo application onto your Pocket PC. Follow the
same software instructions described in Chapter 2, but in the Installation
screen, click RFID Demo.
• Assign a trigger button for SocketScan, or install the Socket Floating
Trigger, as described in Chapter 2.
CHAPYTER 3: RFID DEMO 19