User Manual

Enable Inventory and Loop Modes
The Socket RFID Reader Card has four types of reading modes that result
from different combinations of inventory mode and loop mode. The chart
below describes the results of enabling or disabling the modes.
Tag Select
Mode
Loop
Mode
Inventory
Mode
Description
One tag Disabled Disabled Selects the first tag in RF field
One tag
continuously
Enabled Disabled
Selects the first tag continuously
(the same tag ID will be returned as
long as the tag remains in the RF
field.
All tags
present
Disabled Enabled
Inventory mode: returns the tag IDs
of all tags in the RF field and then
reports when there are no more
tags.
All tags
continuously
Enabled Enabled
Returns the tag IDs of all tags in the
RF field. It does not repeat a tag ID
unless the tag goes out and then re-
enters the RF field.
1. In the main screen of RFID Demo, tap RFID at the bottom of the screen.
In the pop-up menu, select adjust the Inventory Mode and/or Loop
Mode settings as desired.
2. After selecting the desired settings, tap Select Tags. The RFID Reader
Card will begin searching for tags in range, according to the settings you
enabled.
22