User Manual

STEP 1: TURN ON THE CHS/CRS

Turn on the CHS/CRS. Make sure it has sufficient battery power. Refer

to your CHS/CRS documentation for instructions.

STEP 2: ADD CHS/CRS TO MICROSOFT BLUETOOTH

UTILITY

1. Use the Add Bluetooth Device Wizard to discover and connect to

the CHS/CRS. Click on the Bluetooth icon in the task tray. In the

pop-up menu, click Add a Bluetooth Device.

Note: If the Bluetooth icon does not appear, click Start | Control Panel |

Bluetooth Devices. In the Bluetooth Devices utility, click Add.

2. The Add Bluetooth Device Wizard will launch. Check the box My

device is set up and ready to be found. Click Next.

3. Your computer will search for Bluetooth devices in range.