User Manual

24
STEP 1: TURN ON THE CHS/CRS
Turn on the CHS/CRS. Make sure it has sufficient battery power. Refer
to your CHS/CRS documentation for instructions.
STEP 2: START SOCKETSCAN
1. Start SocketScan. Double-click on the SocketScanXP icon on your
desktop.
2. The SocketScan icon
will appear at the bottom of your screen.
STEP 3: CONFIGURE SCANNER SETTINGS
1. Click on the SocketScan icon. In the pop-up menu, click Settings.
Alternatively, click Start | Control Panel | SocketScanXP Settings.
2. The SocketScanXP Settings utility will appear. Click on the CS tab.