User Manual

CHAPTER 5: ACTIVEPAIRING 35
• Enable CS support: Check this box. IMPORTANT!!!
• Enable ActivePairing: Check this box. IMPORTANT!!!
• Bluetooth stack: Select Microsoft SP2.
• COM Port: Select the Standard Serial over Bluetooth link
with the Incoming COM port number reported by the Add New
Bluetooth Device Wizard.
• CS trigger operation: Select whether you want the CRS to
scan only when a Bluetooth connection to the device is
detected. If you select Scan only when connected to host,
scanning will be a few milliseconds slower (Error Proof Protocol
will be enabled).
• Good read indication on CS: Select how you would like the
CRS to indicate that it has successfully read data.