Owners manual

Android: Connect Android Device in Basic Mode

In this mode the scanner functions and communicates similar to a key-

board. Therefore, scanner will work with Notes, and any other

application that support an active cursor.

1. Power on the scanner. Make sure the scanner is

discoverable (unpaired) The Blue light blinks fast.

2. Settings | Bluetooth.

3. Make sure the device has Bluetooth “On” and scan for devices.

4. In the list of found devices, select D750 [xxxxxx]. Tap Pair.

5. The scanner will connect to the Android device.

6. The scanner will beep once after it has connected.

*If you have trouble connecting or pairing with host device, turn host

device’s Bluetooh off/on, and/or perform factory reset to the scanner

(see page 44).

Now you are ready to scan barcodes!

BASIC MODE