Owners manual

STATUS INDICATORS (CONTINUED)

Vibrate Meaning

Vibrate Data successfully scanned

Command Barcodes are available on pages 43-46 to modify the LED,

beep, and vibrate settings.

If you are using a scanner-enabled application, typically the

application provides settings for LED, beep, and vibrate settings.

Conguration Settings

Time after powering on Scanner Bluetooth mode

0-5 minutes Discoverable and connectable

5 minutes If connection is not made, scanner

powers off

2 hours If your scanner is connected but

not used it will power off in 2

hours. When trigger button is

pressed the timer is reset.