Owners manual

Scan command barcode(s) to quickly congure the Scanner.

Make sure the scanner is not connected to a device before scanning

a command barcode! See page 22 for unpairing instructions.

For a complete set of command barcodes, download the Command

Barcodes Sheet: https://www.socketmobile.com/support/download

Charging Stand Modes

Auto Mode (Presentation Mode)

Scanning this bar code will enable

the scanner to enter auto mode when

placed in Socket Mobile’s Charging

Stand. When the scanner is in auto

mode, it will switch to presentation

trigger mode when it detects power on

the cradle pins. When the scanner is

removed from the cradle it will remain

in presentation trigger mode until the

users presses the trigger. At that point

it will switch to normal manual trigger

mode. Auto Mode command barcode is

also printed on the product label.

#FNB 41FBA50003#

Mobile Mode - Normal (default)*

Scanning this bar code will enable the

scanner to enter mobile mode. It will

always be in manual trigger mode even

when placed in the stand or cradle.

*Scanner Factory Reset returns to

Mobile Mode.

#FNB 41FBA50000#

COMMAND BARCODES