User's Manual

ICONS (CONT.)

FAULT/

UNABLE

TO RUN

Solid Red

Indicates when your SoClean 3 has detected

an issue that prevents operating a Disinfect

Cycle or Fresh Air Cycle.

NOTE: When this icon is illuminated, the

device may be operating the cancellation

process (page 30) to remove ozone from the

system prior to allowing the Lid to be opened.

INTRODUCING YOUR SOCLEAN 3

FILTER

ISSUE

Solid Amber

1. May indicate that your Filter has expired

and will need to be replaced. You will not be

able to operate a Disinfect Cycle or a Fresh

Air Cycle.

2. Missing or counterfeit Filter. If you have

installed a new Filter in your SoClean 3 and this

icon illuminates solid amber when the Filter

door is closed, you may have purchased a

counterfeit SoClean 3 Filter and your SoClean

will not operate. Please purchase lters from

SoClean.com to ensure authenticity.

Flashing Amber

Indicates that it is time to order a new Filter. This

icon will ash amber only when you interact

with your SoClean. From the time it begins

to ash amber, you have 30 days or 30 uses

(whichever comes rst) to replace the Filter

NOTE: You can still use your SoClean 3 to

disinfect your CPAP equipment during this time.

A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 15A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 15 7/2/20 5:26 PM7/2/20 5:26 PM