User's Manual
21
Adding distilled water to your humidier reservoir: When you need
to add water to your reservoir, remove the reservoir from the CPAP
machine and remove the SoClean Lid Adapter. Add distilled water,
reinstall the SoClean Lid Adapter, and reinsert into the CPAP machine.
If needed, ll your reservoir
with distilled water. Close
the Reservoir Lid Adapter
and insert the reservoir into
your CPAP unit like you
normally would.
Connect the Ozone Tube
to the Reservoir Lid
Adapter by pushing the
Ozone Tube onto the
Adapter Ozone Port.
3
4
WARNING: The Ozone Tube must be
attached to the SoClean 3 adapter and the
back of the SoClean 3 at all times when
operating your CPAP or the SoClean.
Adapter
Ozone Port
Ozone Tube
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 21A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 21 7/2/20 5:26 PM7/2/20 5:26 PM