User's Manual

31
Insert the Filter into the
slot with the blue Rubber
Gasket facing the
Disinfection Chamber
as shown.
At this point in your SoClean
3 set up, your Control Panel
should appear as shown.
NOTE: The Hose Not Detected
icon is illuminated on your
Control Panel because a CPAP
mask/hose has not been
placed into the SoClean 3
with the Lid closed.
NOTE: If the Filter or Filter Door icon is ashing on your Control
Panel, remove and reinstall the Filter, making sure the door is
fully closed.
Congratulations! You have successfully set up your SoClean 3
and are ready to disinfect your CPAP equipment.
3
Push the Filter Door
until it is fully closed.
4
Rubber
Gasket
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 31A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 31 7/2/20 5:26 PM7/2/20 5:26 PM