User's Manual

STEP 5: At the end of the Disinfect

Cycle, the Cycle Complete icon will

light up green. You can now press

the Lid Open Button and remove

your mask.

Your CPAP equipment is now

disinfected and ready for use!

FRESH AIR CYCLE

The Fresh Air Cycle can be used daily to freshen the air in your CPAP mask

and hose before use. Typically, your CPAP mask and hose will still be in your

SoClean 3 from a Disinfect Cycle and the Fresh Air Cycle can be started

with a simple one-button push.

NOTE: The Fresh Air Cycle does not disinfect your CPAP equipment.

STEP 1: With your CPAP mask and

hose sitting in your SoClean 3, simply

press the Fresh Air Cycle button to

initiate the process. This will over-

ride the programmed Cycle Delay if

it is active.

NOTE: If your CPAP equipment is not

already in your SoClean 3, insert your

CPAP mask and hose as you would to

operate a Disinfect Cycle.

USING YOUR SOCLEAN 3

A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 36A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 36 7/2/20 5:26 PM7/2/20 5:26 PM