User's Manual

DELAY YOUR DISINFECT CYCLE
In the event that you would like the SoClean 3 to operate at a more
convenient time, you can delay your Disinfect Cycle by 2, 4 or 6 hours. For
your convenience the system automatically defaults to a 2-hour delay or
the last delay that you’ve selected so you can just place your mask into
the Disinfection Chamber, close the lid and walk away. Your SoClean 3 will
automatically run after this Cycle Delay expires.
NOTE: Allow approximately 1 second between button presses when selecting
the Cycle Delay.
NOTE: After approximately 3 seconds, the Cycle Delay button will stop flashing
indicating that the countdown has started. You can cancel the Cycle Delay by
pressing the Cycle Delay button once more. You will know the Cycle Delay is
cancelled because there will be no blue indicator lights visible.
The Cycle Delay time is selected by one or more button presses, as
indicated by the blue icons above the Cycle Delay button.
USING YOUR SOCLEAN 3
STEP 1: With your CPAP mask in your
SoClean 3, press the Cycle Delay button
to select the cycle delay time. The delay
button will ash to indicate that the Cycle
Delay can be changed.
NOTE: Your CPAP mask and hose must be
in your SoClean 3, with the Lid closed, to
select a Cycle Delay.
PRESS DELAY INDICATION
1 time 2-hour 1 blue indicator
2 times 4-hour 2 blue indicators
3 times 6-hour 3 blue indicators
4 times OFF No blue indicator
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 38A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 38 7/2/20 5:26 PM7/2/20 5:26 PM