User's Manual

During the selected delay time, the Cycle Delay button and indicator(s)

above the button will illuminate blue until the Disinfect Cycle starts.

NOTE: You can override the Cycle

Delay after it’s set. To do so, press the

Disinfect Cycle button to immediately

start disinfecting or the Fresh Air

Cycle button to freshen the air in your

CPAP equipment.

STEP 2: Once the selected Cycle

Delay time has expired (e.g. 2 hour),

the Disinfect Cycle will automatically

begin.

STEP 3: At the end of the Cycle

Delay and Disinfect Cycle, the Cycle

Complete icon will light up green.

You can now open the Lid and

remove your mask and hose.

The Cycle Delay and Disinfect Cycle

were successfully run and your

CPAP equipment is ready for use!

USING YOUR SOCLEAN 3

NOTE: You cannot delay set a delay

for a Fresh Air Cycle, only for the

Disinfect Cycle.

A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 39A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 39 7/2/20 5:26 PM7/2/20 5:26 PM