User's Manual

41
CLEANING YOUR SOCLEAN 3
To clean, wipe the interior and exterior of your SoClean 3 device with a slightly
damp cloth or CPAP wipes. Please note that the Neutralizing Pre-Wash
should only be used on your CPAP equipment and should not be used on or
in the SoClean 3 device. Do not submerge the SoClean 3 device in liquid
or use chemical cleaners. Do not put water inside the SoClean 3 device.
PREWASH YOUR CPAP EQUIPMENT
Wash your CPAP equipment (mask, hose, reservoir) before using your SoClean
3 for the very rst Disinfection Cycle. Follow your CPAP manufacturer’s
instructions on how to wash your equipment.
VISIBLE CRACKS OR DAMAGE
If your SoClean 3 device has been dropped, is visibly damaged, or if cracks in
the tubing or enclosure are noticed, stop using the device and contact SoClean.
REPLACING THE FILTER
The Filter must be replaced approximately every 6 months depending on usage.
The Filter Issue icon will ash amber to remind you to change your Filter. The
device will no longer operate a Disinfect Cycle if the Filter replacement
warning expires and turns solid amber before the Filter is replaced.
Maintenance
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 41A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 41 7/2/20 5:26 PM7/2/20 5:26 PM