User's Manual
46
There may be an
internal device issue.
This icon is solid red
on the Control Panel
None of the lights illuminate,
even when I press buttons
The SoClean 3 may not
be connected to power.
PROBLEM POSSIBLE CAUSES
SoClean 3 will
not operate a
Disinfect Cycle
or Fresh Air
Cycle
YOU SEE
There may be an
issue with the CPAP
hose detection.
This icon is solid
amber on the
Control Panel
The Filter is expired.
This icon is solid amber
on the Control Panel
The hose may have
been detected after
the lid was closed.
This icon is flashing
amber on the
Control Panel
Use was attempted
to defeat the Hose
Detect feature.
This icon is solid amber
on the Control Panel
The Filter door
may be open.
This icon is î›±ashing amber
on the Control Panel
Time to order
new Filter.
The Lid may
not be closed.
Your CPAP hose
may be incompatible.
General Troubleshooting
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 46A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 46 7/2/20 5:26 PM7/2/20 5:26 PM