User's Manual

10
CYCLE START
Initiates the Cycle
with a single push.
CYCLE LENGTH
Used to set a 5, 10 or 20 minute
Cycle Length.
The default Cycle Length is set
to 20 minutes. You can select a
length by pushing once for 5
minutes, twice for 10 minutes
and three times for 20 minutes.
LID OPEN
Opens the Lid when the device is powered.
This button can also be used to cancel an active
Cycle by pushing and holding for 5 seconds.
NOTE: If you cancel a Cycle, the Lid cannot be
opened until Cycle Complete Icon illuminates green.
NOTE: There is no power button. The device
is powered and “on” when it is plugged in.
CAUTION: In the event of loss of power, rerun
the Cycle.
PARTS, BUTTONS & ICONS
A000867-11 Rev B_SDD-Manual-070720_ASC.indd 10A000867-11 Rev B_SDD-Manual-070720_ASC.indd 10 7/7/20 10:29 AM7/7/20 10:29 AM