User Instructions

11EN
DIRIS Digiware M-50 & M-70 - 548751C - SOCOMEC
5.2. Introduction to DIRIS Digiware M
DIRIS Digiware M-50 and M-70 act as the Digiware system interface and communication gateway centralising
measurements from DIRIS Digiware modules and communicating data over Ethernet.
They can also centralise measurements from other SOCOMEC meters and power monitoring devices :
COUNTIS, DIRIS A, DIRIS B.
They
centralise data from up to 32 devices (a maximum of 192 circuits).
These products may be connected by a Digiware bus and/or an RS485 bus.
5.2.1. Introduction to DIRISDigiware M-50
The DIRIS Digiware M-50 gateway is a master device on the RS485 bus and master on the DIRIS Digiware bus. It is
used as an Ethernet gateway.
The Ethernet port is used to:
• Communicate over Ethernet in ModbusTCP (max. 32 simultaneous connections) data from meters and
measuring devices connected to its Digiware and RS485 ports.
• Communicate over Ethernet using BACnet IP and SNMP protocols, data from meters and power monitoring
devices connected to the Digiware or RS485 port inputs of the DIRIS Digiware M-50.
• Automatically and cyclically export historical measurements via FTP or FTPS.
• Automatically send alarm notications via emails (SMTP or SMTPS).
Digiware Bus
Termination
Digiware bus
DIRIS Digiware M-50
PC
120 Ω 120 Ω
RS485
Ethernet
DIRIS B DIRIS
COUNTIS