CY8001 USER MANUAL 2 USER MANUAL 20 GEBRUIKSAANWIJZING 8 GEBRAUCHSANWEISUNG 26 MANUALE D’USO 14 MANUEL D’UTILISATION 32 ANVÄNDARMANUAL
ENGLISH Machine Head pure guaranteed Carbonating Button Release Button Flask Lever Rear Cover CO2 Cylinder Glass Bottle Flask Water line CY8001 Drinksmaker Glass bottle 2
Dear customer Thank you for purchasing the CY8001 Drinksmaker. Now you can create your homemade soda in only seconds. It's that simple and it makes so much sense. You are joining millions of our users around the world who are helping to save the environment while also saving money! With your new Drinksmaker, you will help the world to get rid of plastic bottles, plastic waste and the unnecessary transport of bottled beverages. And the more you use it, the more money you'll save.
ASSEMBLING YOUR DRINKSMAKER STEP 1: Turn the flask lever to the right, to the unlocked position (machine head will rise automatically) (Diagram 1). STEP 2: Tilt glass bottle flask forward and remove glass bottle (Diagram 2). STEP 3: Return glass bottle flask to upright position, push and hold the machine head down and turn the flask lever left, to the locked position (Diagram 3). Insert the gas cylinder: STEP 4: Press rear cover release button downwards and remove back cover (Diagram 4).
1 2 3 4 pure guaran teed 5 6 5
CARING FOR YOUR DRINKSMAKER To clean your Drinksmaker, wipe with a soft damp cloth. Do not wash it in a dishwasher. Do not place or store the Drinksmaker close to a heat source. YOUR GLASS BOTTLE Spare glass bottles are available at your local Soda-Club/SodaStream retailer. Do not use any other glass bottle other than an original Soda-Club/SodaStream bottle that is suitable for the CY8001 Drinksmaker. Do not subject the glass bottle to extreme temperature fluctuations (e.g.
TIPS AND TROUBLE SHOOTING [ [ Always carbonate COLD water. Never carbonate anything other than plain water. 1. If your Drinksmaker does not carbonate: • Make sure you are pressing the carbonating button down as far as possible in short sharp bursts. • If the cylinder is empty, exchange it for a full one. • Check that the glass bottle has been filled up to the fill line. 2.
