User Guide

ManualsBrandsSoehnle ManualsOther3011

4.Y

832

Operating Manual

Operating ManualOperating Manual

Operating Manual 3011

3011 3011

3011

Operating Manual Digital Indicator 3011 Version V0.1 Stand: 06.09.07 Page 1 of 8

Subject to technical modifications. Drafts are protected according to §823 BGB: Copy, duplication or circulation only with explicit approval.

Soehnle Professional GmbH

Soehnle Professional GmbHSoehnle Professional GmbH

Soehnle Professional GmbH & Co. KG

& Co. KG & Co. KG

& Co. KG | P.O. Box 1308 | D-71536 Murrhardt | Telephone +49 (0) 7192 / 9319 – 0 | E-Mail info@soehnle-professional.com

www.soehnle

profess

ional.com

Digital indicator 3011

Summary of content (8 pages)

PAGE 1
Operating Manual 3011 Digital indicator 3011 Operating Manual Digital Indicator 3011 Version V0.1 Stand: 06.09.07 Page 1 of 8 Subject to technical modifications. Drafts are protected according to §823 BGB: Copy, duplication or circulation only with explicit approval. Soehnle Professional GmbH & Co. KG 4.Y-8328 | P.O. Box 1308 | D-71536 Murrhardt | Telephone +49 (0) 7192 / 9319 – 0 | E-Mail info@soehnle-professional.com www.soehnle-professional.
PAGE 2
Operating Manual 3011 Table of content ELECTRONIC NAMEPLATE TYPE 3011 .............................................................................. 3 FOR NON-APPROVABLE SCALES, “D“ INSTEAD OF “E“ IS INDICATED. SWITCH ON/OFF TYPE 3011 ............................................................................................................... 3 SWITCH ON/OFF TYPE 3011 ................................................................................................ 4 ZEROING TYPE 3011 .....................
PAGE 3
Operating Manual 3011 Electronic nameplate type 3011 By pressing the keys • T and With the arrow keys ( T F , the electronic nameplate is indicated. ), the electronic nameplate as well as the serial number and calibration counter of the measuring point can be indicated on the display. The indication of the electronic nameplate is terminated by pressing the key . For a one-range scale, the parameters of the other range are not applicable. Indication Stepps 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
PAGE 4
Operating Manual 3011 SWITCH On/Off Type 3011 • Switch the indicator on/off via the ON/OFF key. • While switching on, the scale is zeroed. If the scale is switched on outside the zero range at power-on, the scale indicates an error message: _0_ = Measuring value below zero limit _ _ 0 = Measuring value above zero limit The application is switched off to avoid the cause for under/overload before the next switch on.
PAGE 5
Operating Manual 3011 Zeroing Type 3011 • Zeroing via the zero key. • • Zeroing approvable: -1 to +3% according to Approval Directive. Zero range non-approvable: Same range as set zero range limits at power-on. • The display indicates after keypress • • at <-1% message Err 5 • at > 3% message Err 5 Zero tracking: in the setting mode, the zero tracking can be switched on or off (on = 0,5 d/sec at standstill). Operating Manual Digital Indicator 3011 Version V0.1 Stand: 06.09.
PAGE 6
Operating Manual 3011 Tara functions Type 3011 • The following tare function is available as standard fort he indicator 3011 to save weighing data in the tare memory: 1. Manual tare • Keypad management: • Manual tare: Via the key "Tara" T on the membrane keyboard. • Manual tare: by pressing the tare key. The tare value is saved, the weight indication is at zero, switchover from gross to net is realised => “net” in display via a red LED.
PAGE 7
Operating Manual 3011 X10 DISPLAY Type 3011 • The tenfold higher resolution on the display is activated by pressing the keys “PRINT” and “-0-“. • If the scale is calibrated approvable, the tenfold higher resolution is indicated after a keypress for 5 seconds or as long as the keys are hold. Operating Manual Digital Indicator 3011 Version V0.1 Stand: 06.09.07 Page 7 of 8 Subject to technical modifications.
PAGE 8
Operating Manual 3011 PRINT Type 3011 • An optional interface RS232 must be assembled in the digital indicator 3011 for the function „Print“. • The stored print template is send via the interface by pressing the print key. Print template design and print conditions are realised via the service program. Operating Manual Digital Indicator 3011 Version V0.1 Stand: 06.09.07 Page 8 of 8 Subject to technical modifications.