WEB CONNECT Manual BMI
Content 1. Introduction 3 1.1 Proper use 3 1.2 Safety information 3 1.3 The body mass index (BMI) 5 1.4 Rules for weighing 5 2. Start-up operation 6 2.1 Description of the device 6 2.2 System requirements 7 2.3 Installation 7 2.4 Insert or replace batteries 7 2.5 Activate connection between web box and scale 8 2.6 Messages 8 2.7 Configure IP setting manually 9 2.8 Setting up the user account 10 2.
1. Introduction 1.1 Proper use With Soehnle Web Connect you will always have your body weight and BMI at a glance. Whether at home on the PC or while on the go using your pad or smartphone - with the personal account on the web you are always up to date. With our products we would like to support you in your personal responsibility for your body. If you are unsure of which measures are suitable for your personal wellbeing, it is imperative that you obtain professional advice from a physician or dietician.
Warning • Consult a physician or a dietician before reducing your weight. • Keep the device away from small children. • Support physically handicapped persons in the use of this device. • Always step onto the intended location of the device and never on the edges and corners; always stand still during the analysis. • Be sure to use the right type of battery. Insert the battery with the pole in the correct direction.
1.3 The body mass index (BMI) The foundation of this calculation is the body mass index - an index number that can be used to interpret body weight in terms of the risk it poses to your health. The index number is calculated based on the body weight in kilogram, divided by the body height squared (example: BMI = 75 kg = 24,5) 1,75 m x 1,75 m Classification of the body weight based on BMI (Source: World health organization, 2000) BMI (kg/m²) Classification < 18.5 Underweight 18.5 - 24.
2. Start-up operation 2.1 Description of the device Scale À Â Ã Ä Á Å Ç È 20 14 10 12 19 Web Box Æ 11 15 16 13 1. Display 2. Weighing platform 3. 4. 5. 6. 17 18 14. 15. 16. 17. 18. Activation key Battery cover Battery compartment Weighing cell Power supply socket Reset key Broadband interface Internet connection indicator Network connection indicator 19. Power supply unit 20. Internet cable 7. Measured value 8. Weak battery 9. Internet connection disrupted 10.
2.2 System requirements 1. Broadband router with one free LAN port (10 Mbit/s) and internet access 2. Internet-capable device (e.g. smartphone, tablet or PC/MAC) with web browser of the newest generation. No software or app installation required. 3. Valid email address for registration on the portal. 2.3 Installation 1. Connect the web box with the power supply unit to the power network. 2. Use the network cable to connect the web box to the router. The connection is established when both LEDs light up.
2.5 Activate connection between web box and scale The distance between the web box and the scale should not exceed 20 cm during activation. Push the button on the back of the scale to start activation. Activation was successful if [ ] is displayed. However, if the scale displays E8, activation failed. 2.
2.7 Configure IP setting manually In rare cases it might be necessary to configure IP addresses manually. This might be the case if the DHCP* function is deactivated on the router. If this is the case, please continue as follows: 1. T he web box must be switched on (both LEDs are flashing). 2. Push the reset key and hold it for approx. 5 seconds. Both LEDs will light up simultaneously. When both LEDs begin to flash, release the key. 3. Then connect web box and PC using the network cable. 4.
2.8 Setting up the user account 1. Visit the website “my.soehnle.com/new” 2. Select the desired language. 3. Go to ”Registration” and enter your user name and your personal email address. Note: The scale can be used by up to 8 persons. Each user must have its own email address. 4. Continue with ”Send”. 5. You will now receive an email with your user name and password. Note: You can see your personal data at any time in your login area. 6. Select ”Start” and enter your user name and password.
2.9 Entering personal data More personal data must be entered to finish setting up the user account. This data is absolutely necessary for interpretation of the measurement data. 1. Select language 2. Enter gender 3. Enter the name with which you would like to be addressed 4. Set up birthdate 5. Enter body height 6. Select activity level 7. Select desired unit of measurement for display (kg-lb-st) 8. Enter target weight 9. The user name can be changed here 10.
3. Weighing For concise results, please step onto the platform without any clothing and under the same conditions (time, food consumption, etc.). Note: An internet connection must be available if the data is to be transmitted to your personal account. Only the weight will be displayed if no internet connection is available. The measured data will not be saved. 1. Step onto platform. 2. The weight will be displayed. Stand still during transmission and while data is being transmitted.
4. The personal account 4.1 The main menu 1. Go to my.soehnle.com, enter your user name and your password and tap on ”Login”. 2. You will be in the main menu. The values that were determined last and the difference to your desired weight will be displayed. Links to the other information pages are available here: - Diagram display - Table display - My profile (see chapter 2.7.1) 4.2 Diagram display Select the period for review and the parameter to be displayed.
4.3 Tabular display Go to ”Table”. elect the period for review (week, month, 6 months, year, or customized S via ”Filter data”) for which the values are to be displayed. ! next to an individual value, you can edit this data or If you tap on add a comment. se ”Add data manually” to add weight values and comments without using U the scale. 5. Feedback se ”My profile/feedback” to send us remarks regarding this program or the U product. 6.
7. Messages Problem Cause Solution No display No batteries or batteries are empty Insert or replace batteries Batteries inserted incorrectly Insert batteries correctly 1. Radio communication is interrupted 2. Distance between scale and web box is too great during activation Activate the product again with a distance of 20 cm between scale and web box. Network error Check the network connection The product has not been synchronized Synchronize the product (see chapter 2.
8. Technical specifications Web Box - Radio frequency: 434 MHz - Power supply unit: Model: BLJ5W050100P-V Input: 100-240V~50/60Hz, 150mA Output: 5V ⎓ 1000mA Scale - Load capacity x graduation = max 150 kg x 100 g / max 330 lb / 0.2 lb - 8 memory slots for individual persons - Measurement current: < 0.1 mA RMS, 50/5 kHz - Radio frequency: 434 MHz - Batteries: 4 x 1.5 V AAA batteries included in the scope of delivery.
9. Declaration of conformity Soehnle herewith declares that this device is in compliance with the basic requirements and all other applicable regulations of directive 1999/5/EC. You will find the EU compliance declaration on www.soehnle.com. Although the appliance has been tested and its emissions do not exceed the permitted radio frequency emission levels as laid down in the above directives, there is no guarantee that interference will not occur in certain situations.
11. Service and Support Monday through Friday from 8:30 a.m. to noon Germany Ph.: 08 00 - 5 34 34 34 International Ph.: +49 - 26 04 - 97 70 If you‘d like to contact us in writing, please use the contact form at the SOEHNLE homepage www.soehnle.com. For contact information of SOEHNLE representative in your country, visit www.soehnle.com. 12.
www.soehnle.
