Operation Manual

8
2.5 Activate connection between web box and scale
The distance between the web box and the scale should not exceed
20 cm during activation.
Pushthebuttononthebackofthescaletostartactivation.
Activation was successful if [ ] is displayed.
However, if the scale displays E8, activation failed.
2.6 Messages
Problem Cause Solution
LAN and WAN LED are
dark
Error in power supply Check the web box power supply connection
LAN and WAN LED are
flashing
Web box does not
communicate with the
router
1) Check the router power supply connection
2) Check the connection between web box and router
LAN LED lights up,
WAN LED flashes
Network is okay
but the web box does not
communicate with the
network
1) If the DHCP function was activated on the router:
push reset key on web box to reset to factory settings.
2) If the DHCP function was not activated on the
router: follow chapter 2.
LAN and WAN LED light
up. Data transmission
was successful but data
is not displayed in the
personal account
No user selected Please set up user, see chapter 2.8
Data cannot be allocated
automatically to a user
Please follow the steps in chapter 3 to allocate data to
a user.