Operation Manual

EN
25
INTRODUCTION
Measurement Principle
This product uses the Oscillome-
tric Measuring method to detect
blood pressure. Before every
measurement, the unit establishes
a “zero pressure” equivalent to the
air pressure. Then it starts inflating
the arm cuff, meanwhile, the unit
detects pressure oscillations ge-
nerated by beat-to-beat pulsatile,
which is used to determine the
systolic and diastolic pressure, and
also pulse rate.
Device description
Please note the fold-out page.
A
Cuff
B
Air hose
C
LCD display
D
Pump
E
Power plug connection
F
Battery compartment
G
Memory key (
)
H
Settings key (
)
I
Start/Stop key ( )
Power supply
1. Battery operation:
4 alkaline batteries AA 6 V DC
2. Operation with optional
power adapter:
6V 1A
Please use only the adapter approved by the
manufacturer. Available separately (Item
No. 89165/5).
Inserting and replacing
the batteries
1. Open the battery compartment.
2. Insert the batteries. Note the
correct polarity.
3. Close the battery compartment
cover.
The normal service life of new and unused
batteries is 300 measurements at a meas
-
urement period of 60 seconds each.