User's Manual

English
1111
Printout: Press the "Org A", "Org B", "Org C" and "Org D" keys together with F6
Accept to print out (only possible if a print view is saved). Only the organisation
data contained in an entry are printed out.
Show content: Press the associated ORG key.
Clear content: Press the associated ORG key. Press the CL key followed by
F6 Accept.
Info: When a barcode function is used, the organisation data display is disabled.
2.7 Switching between scales
Switch between several connected scales.
The 3030 Programming Terminal has up to three measuring points integrated and
can connect up to a maximum of 30 measuring points. Switchover between the
measuring points is either manual or automatic.
Manual switchover
Press the key with the scale symbol briefly.
The activated measuring points are switched one after the other.
Press the key with the scale symbol and hold down. An input box opens for you to
enter the measuring point number directly and accept it.
Automatic switchover
For a description, see the "Count" function. The display shows the number of the
activated measuring point on the right of the symbol bar. Press the Info keys to
display the calibration and scale data of the activated measuring point.
2.8 Unit
Display the weighing result in a second unit. The unit in the display pane is defined
in Setting mode during calibration.
You can activate or deactivate the display of the second unit in the additional
display.
Press the function change key (F>) to switch to the following level.
Press function key F3 Unit.
Define the second unit in Setting mode for each connected scale. For information
on the Setting mode, see the detailed CD manual.
Gross X 10 Unit Program
Setting
mode
Ba_3030_GB_neu.qxd 04.12.2006 11:01 Seite 11