FOR MEASURABLE SUCCESS COUNTING SCALE 9222 Operating Manual Trade, Commerce and Industry www.soehnle-professional.
ENGLISH Counting Scale 9222 INDEX 1. General Information Application Safety Notices Cleaning Maintenance and Service Note Warranty/Liability Specifications Disposal P. 3 P. 3 P. 3 P. 3 P. 3 P. 3 P. 4 P. 4 P. 4 2. Using the Scales for the First Time Supplied Contents Assembling the Scales Switching on/off P. 5 P. 5 P. 5 P. 5 3. Input and Control Control Keys Display Display Symbols P. 6 P. 6 P. 7 P. 7 4.
1. GENERAL INFORMATION ■ Application ■ Cleaning The Soehnle Professional Counting Scale 9222 is designed for weighing goods and calculating unit totals. All you need to clean the equipment is a damp cloth and a commercial cleaning agent. Do not use scouring agents. ■ Safety Notices ■ Maintenance and Service Read the operator manual carefully before using the equipment for the first time. It contains important information on the installation, correct use and maintenance of the equipment.
ENGLISH Counting Scale 9222 ■ Warranty/Liability ■ Specifications If the supplied goods contains a defect attributable to Soehnle Professional, Soehnle Professional shall be entitled to rectify the defect or provide a replacement. Replaced parts shall become the property of Soehnle Professional. Should the rectification or replacement not prove unsatisfactory, statutory provisions shall apply. The warranty period is for 2 years and starts on the day of purchase. Please keep your invoice as a receipt.
2. USING THE SCALES FOR THE FIRST TIME ■ Supplied Contents ■ Switching on/off • • • Switch the scales on using the On button, and off using the Off button (see illustration). Do not load the scales at this point. Scales Platform Wall power supply ■ Assembling the Scales 1. Remove the cover from the platform and place the platform on the scales. 2. Assemble the scales at the application point. 3. Use the adjustable legs and the spirit level to ensure the scales are mounted horizontally. 4.
ENGLISH Counting Scale 9222 3. INPUT AND CONTROL ■ Control Keys ALARM 7 8 9 Off ADD 4 5 6 On TOTAL 1 2 3 G N R PLU 0 .
■ Display NET kg Total weight g PLU kg Reference weight or amount g ABCD Hi Calculated unit total ACC Lo ■ Display Symbols Charge battery Display in kilograms Net weight Display in grams Idle Zero report Load above upper target weight Load below lower target weight PLU memory Sum total memory 7
ENGLISH Counting Scale 9222 4. WEIGHING AND COUNTING ■ Zero setting 0 ■ Counting If after powering up the scales there is no load on the scales but the display is not zero, press 0 . Possible zero setting range –2%…+2% of the weighing range. . The display shows ■ Calculating / Deducting the Tare Weight Weighing with the tare weight calculated • Place the container on the platform. . • Press The display goes to zero. .
• Remove the reference pieces from the platform and wait briefly until the scales have calculated the unit weight. Other amounts placed on the scales will now also be counted. Compensating fluctuating weights Place other reference pieces on the scales. Press to calculate the exact unit weight. Counting with a known unit weight • Enter the known unit weight in grams. • Press 1 within 4 seconds, otherwise the input will be deleted automatically. Other amounts placed on the scales will now also be counted.
ENGLISH Counting Scale 9222 ■ Selecting PLUs Displaying the sum total . • Press Selecting PLUs stored under 01 12 the PLU shortcut keys 13 24 • Press the required PLU shortcut key. For the lower limit press the key again. PLU is activated. Deleting the sum total in the memory • Press C . ■ Saving PLU (Product Look Up) PLUs are used to store information on parts that are used regularly, so that the data can be retrieved quickly from the memory.
■ Programming the Tare Weight as Standard • Zero point calibration < A/D reading < reading 0 (grams) < "Pnt 0" Make sure that the scales are empty. Wait until the A/D reading (1st row) is stable, to continue. then press • Setting the calibration weight < A/D reading < calibration weight 0 (grams) < "Pnt. CAL" Place the calibration weight (min. 1/3 of the weighing range) on the platform. Enter the weight in grams via the keypad. Wait until .
ENGLISH All rights reserved. © Soehnle Professional GmbH & Co. KG. No publication, reproduction or any form of use or transfer to third parties – whether in part or in revised form – without the consent of Soehnle Professional GmbH & Co. KG. Subject to technical modifications Counting Scale 9222 Soehnle Professional GmbH & Co. KG Manfred-von-Ardenne-Allee 12 DE-71522 Backnang Phone +49 (0) 71 91 / 34 53-0 Fax +49 (0) 71 91 / 34 53-211 info@soehnle-professional.com www.soehnle-professional.