User Manual Part 2

Updating the Firmware Manually
Chapter 17: Updating the Firmware 549
Note: When the Software Updates service is set to Automatic, you can still manually
check for updates.
3. To set the Safe@Office appliance so that software updates must be checked
for manually, drag the Automatic/Manual lever downwards.
The Safe@Office appliance does not check for software updates automatically.
4. To manually check for software updates, click Update Now.
The system checks for new updates and installs them.
Updating the Firmware Manually
To update your Safe@Office firmware manually
1. Click Setup in the main menu, and click the Firmware tab.
The Firmware page appears.
2. Click Firmware Update.