User Manual Part 2
Table Of Contents
- Using SmartDefense
- Using Antivirus and Antispam Filtering
- Overview
- Using VStream Antivirus
- Using VStream Antispam
- How VStream Antispam Works
- Header Marking
- Default Antispam Policy
- Enabling/Disabling VStream Antispam
- Viewing VStream Antispam Statistics
- Configuring the Content Based Antispam Engine
- Configuring the Block List Engine
- Configuring the IP Reputation Engine
- Configuring the VStream Antispam Policy
- Configuring the Safe Sender List
- Configuring VStream Antispam Advanced Settings
- Using Centralized Email Filtering
- Using Web Content Filtering
- Updating the Firmware
- Using Subscription Services
- Working With VPNs
- Overview
- Setting Up Your Safe@Office Appliance as a VPN Server
- Adding and Editing VPN Sites
- Viewing and Deleting VPN Sites
- Enabling/Disabling a VPN Site
- Logging in to a Remote Access VPN Site
- Logging Out of a Remote Access VPN Site
- Using Certificates
- Viewing VPN Tunnels
- Viewing IKE Traces for VPN Connections
- Viewing VPN Topology
- Managing Users
- Using Remote Desktop
- Controlling the Appliance via the Command Line
- Maintenance
- Viewing Firmware Status
- Upgrading Your Software Product
- Configuring a Gateway Hostname
- Configuring Syslog Logging
- Configuring HTTPS
- Configuring SNMP
- Setting the Time on the Appliance
- Using Diagnostic Tools
- Backing Up and Restoring the Safe@Office Appliance Configuration
- Using Rapid Deployment
- Resetting the Safe@Office Appliance to Defaults
- Running Diagnostics
- Rebooting the Safe@Office Appliance
- Using Network Printers
- Troubleshooting
- Specifications
- Glossary of Terms
- Index
Overview
562 Check Point Safe@Office User Guide
• SecuRemote Internal VPN Server. SecuRemote can also be used from your
internal networks, allowing you to secure your wired or wireless network with
strong encryption and authentication.
• L2TP VPN Server. Makes a network available to authorized users who connect
from the Internet or from your internal networks using an L2TP client such as
the Microsoft L2TP IPSec VPN Client.
• Site-to-Site VPN Gateway. Can connect with another Site-to-Site VPN Gateway in
a permanent, bi-directional relationship.
• Remote Access VPN Client. Can connect to a Remote Access VPN Server, but
other VPN sites cannot initiate a connection to the Remote Access VPN Client.
Defining a Remote Access VPN Client is a hardware alternative to using
SecuRemote software.
All Safe@Office models provide full VPN functionality. They can act as a Remote Access
VPN Client, a Remote Access VPN Server for multiple users, or a Site-to-Site VPN
Gateway.
A virtual private network (VPN) must include at least one Remote Access VPN Server or
gateway. The type of VPN sites you include in a VPN depends on the type of VPN you
want to create, Site-to-Site or Remote Access.
Note: A locally managed Remote Access VPN Server or gateway must have a static
IP address. If you need a Remote Access VPN Server or gateway with a dynamic
IP address, you must use SofaWare Security Management Portal (SMP)
management.
A SecuRemote/SecureClient or Safe@Office Remote Access VPN Client can have
a dynamic IP address, regardless of whether it is locally or remotely managed.
Note: This chapter explains how to define a VPN locally. However, if your appliance
is centrally managed by a Service Center, then the Service Center can
automatically deploy VPN configuration for your appliance.