User Manual Part 2
Table Of Contents
- Using SmartDefense
- Using Antivirus and Antispam Filtering
- Overview
- Using VStream Antivirus
- Using VStream Antispam
- How VStream Antispam Works
- Header Marking
- Default Antispam Policy
- Enabling/Disabling VStream Antispam
- Viewing VStream Antispam Statistics
- Configuring the Content Based Antispam Engine
- Configuring the Block List Engine
- Configuring the IP Reputation Engine
- Configuring the VStream Antispam Policy
- Configuring the Safe Sender List
- Configuring VStream Antispam Advanced Settings
- Using Centralized Email Filtering
- Using Web Content Filtering
- Updating the Firmware
- Using Subscription Services
- Working With VPNs
- Overview
- Setting Up Your Safe@Office Appliance as a VPN Server
- Adding and Editing VPN Sites
- Viewing and Deleting VPN Sites
- Enabling/Disabling a VPN Site
- Logging in to a Remote Access VPN Site
- Logging Out of a Remote Access VPN Site
- Using Certificates
- Viewing VPN Tunnels
- Viewing IKE Traces for VPN Connections
- Viewing VPN Topology
- Managing Users
- Using Remote Desktop
- Controlling the Appliance via the Command Line
- Maintenance
- Viewing Firmware Status
- Upgrading Your Software Product
- Configuring a Gateway Hostname
- Configuring Syslog Logging
- Configuring HTTPS
- Configuring SNMP
- Setting the Time on the Appliance
- Using Diagnostic Tools
- Backing Up and Restoring the Safe@Office Appliance Configuration
- Using Rapid Deployment
- Resetting the Safe@Office Appliance to Defaults
- Running Diagnostics
- Rebooting the Safe@Office Appliance
- Using Network Printers
- Troubleshooting
- Specifications
- Glossary of Terms
- Index
Setting Up Your Safe@Office Appliance as a VPN Server
Chapter 19: Working With VPNs 573
3. In the Preshared Secret field, type the preshared secret to use for secure
communications between the L2TP clients and the VPN Server.
The secret can contain spaces and special characters. It is used to secure L2TP
connections for all users.
In addition to entering this secret, each L2TP user will have to authenticate with a
username and password.
For information on defining users with VPN access permissions, see Setting Up
Remote VPN Access for Users on page 650.
4. To allow authenticated user
s to by
pass the default firewall policy and access
your internal network without restriction, select the Bypass default firewall
policy check box.
User-defined rules will still apply to the authenticated users.
5. Click Apply.
The L2TP VPN Server is enabled for the specified connection types.
Installing SecuRemote
If you configured the SecuRemote Internal VPN Server, you must install the
SecuRemote/SecureClient VPN Client on all internal network computers that should be
allowed to remotely access your network via SecuRemote connections.
To install SecureClient/SecuRemote
1. Click VPN in the main menu, and click the VPN Server tab.
The VPN Server page appears.
2. Click the Download link.
The VPN-1 SecuRemote for Safe@Office page opens in a new window.
3. Follow the online instructions to complete installation.
SecureClient/SecuRemote is installed.