User Manual Part 2
Table Of Contents
- Using SmartDefense
- Using Antivirus and Antispam Filtering
- Overview
- Using VStream Antivirus
- Using VStream Antispam
- How VStream Antispam Works
- Header Marking
- Default Antispam Policy
- Enabling/Disabling VStream Antispam
- Viewing VStream Antispam Statistics
- Configuring the Content Based Antispam Engine
- Configuring the Block List Engine
- Configuring the IP Reputation Engine
- Configuring the VStream Antispam Policy
- Configuring the Safe Sender List
- Configuring VStream Antispam Advanced Settings
- Using Centralized Email Filtering
- Using Web Content Filtering
- Updating the Firmware
- Using Subscription Services
- Working With VPNs
- Overview
- Setting Up Your Safe@Office Appliance as a VPN Server
- Adding and Editing VPN Sites
- Viewing and Deleting VPN Sites
- Enabling/Disabling a VPN Site
- Logging in to a Remote Access VPN Site
- Logging Out of a Remote Access VPN Site
- Using Certificates
- Viewing VPN Tunnels
- Viewing IKE Traces for VPN Connections
- Viewing VPN Topology
- Managing Users
- Using Remote Desktop
- Controlling the Appliance via the Command Line
- Maintenance
- Viewing Firmware Status
- Upgrading Your Software Product
- Configuring a Gateway Hostname
- Configuring Syslog Logging
- Configuring HTTPS
- Configuring SNMP
- Setting the Time on the Appliance
- Using Diagnostic Tools
- Backing Up and Restoring the Safe@Office Appliance Configuration
- Using Rapid Deployment
- Resetting the Safe@Office Appliance to Defaults
- Running Diagnostics
- Rebooting the Safe@Office Appliance
- Using Network Printers
- Troubleshooting
- Specifications
- Glossary of Terms
- Index
Changing Network Printer Ports
Chapter 24: Using Network Printers 755
Changing Network Printer Ports
When you set up a new network printer, the Safe@Office appliance automatically assigns
a port number to the printer. If you want to use a different port number, you can easily
change it, as described in Setting Up Network Printers on page 734.
However, yo
u may sometimes need to change the port number after completing printer
setup. For example, you may want to replace a malfunctioning network printer, with
another existing network printer, without reconfiguring the client computers. To do this,
you must change the replacement printer's port number to the malfunctioning printer's port
number, as described below.
Note: Each printer port number must be different, and must be a high port.
To change a printer's port
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Next to USB, click Edit.
The USB Devices page appears, displaying a list of connected printers.
3. Next to the desired printer, click Edit.
The Printer Setup page appears.
4. In the printer's Printer Server TCP Port field, type the desired port number.
5. Click Apply.