User Manual Part 2
Table Of Contents
- Using SmartDefense
- Using Antivirus and Antispam Filtering
- Overview
- Using VStream Antivirus
- Using VStream Antispam
- How VStream Antispam Works
- Header Marking
- Default Antispam Policy
- Enabling/Disabling VStream Antispam
- Viewing VStream Antispam Statistics
- Configuring the Content Based Antispam Engine
- Configuring the Block List Engine
- Configuring the IP Reputation Engine
- Configuring the VStream Antispam Policy
- Configuring the Safe Sender List
- Configuring VStream Antispam Advanced Settings
- Using Centralized Email Filtering
- Using Web Content Filtering
- Updating the Firmware
- Using Subscription Services
- Working With VPNs
- Overview
- Setting Up Your Safe@Office Appliance as a VPN Server
- Adding and Editing VPN Sites
- Viewing and Deleting VPN Sites
- Enabling/Disabling a VPN Site
- Logging in to a Remote Access VPN Site
- Logging Out of a Remote Access VPN Site
- Using Certificates
- Viewing VPN Tunnels
- Viewing IKE Traces for VPN Connections
- Viewing VPN Topology
- Managing Users
- Using Remote Desktop
- Controlling the Appliance via the Command Line
- Maintenance
- Viewing Firmware Status
- Upgrading Your Software Product
- Configuring a Gateway Hostname
- Configuring Syslog Logging
- Configuring HTTPS
- Configuring SNMP
- Setting the Time on the Appliance
- Using Diagnostic Tools
- Backing Up and Restoring the Safe@Office Appliance Configuration
- Using Rapid Deployment
- Resetting the Safe@Office Appliance to Defaults
- Running Diagnostics
- Rebooting the Safe@Office Appliance
- Using Network Printers
- Troubleshooting
- Specifications
- Glossary of Terms
- Index
SmartDefense Categories
430 Check Point Safe@Office User Guide
Table 76: IP Fragments Fields
In this field… Do this…
Forbid IP Fragments Specify whether all fragmented packets should be dropped, by selecting
one of the following:
• True. Drop all fragmented packets.
• False. No action. This is the default.
Under normal circumstances, it is recommended to leave this field set to
False. Setting this field to True may disrupt Internet connectivity, because
it does not allow any fragmented packets.
Max Number of
Incomplete Packets
Type the maximum number of fragmented packets allowed. Packets
exceeding this threshold will be dropped.
The default value is 300.
Timeout for
Discarding
Incomplete Packets
When the Safe@Office appliance receives packet fragments, it waits for
additional fragments to arrive, so that it can reassemble the packet.
Type the number of seconds to wait before discarding incomplete
packets.
The default value is 10.
Track Specify whether to log fragmented packets, by selecting one of the
following:
• Log. Log all fragmented packets.
• None. Do not log the fragmented packets. This is the default.