User's Manual

Using Internet Setup
70 Check Point Safe@Office User Guide
In this field… Do this…
Service Type your service name.
If your ISP has not provided you with a service
name, leave this field empty.
MTU The MTU field allows you to control the maximum
transmission unit size.
As a general recommendation you should leave this
field empty. If however you wish to modify the default
MTU, it is recommended that you consult with your
ISP first and use MTU values between 1300 and
1500.
Server IP If you selected PPTP, type the IP address of the
PPTP server as given by your ISP.
If you selected Telstra (BPA), type the IP address of
the Telstra authentication server as given by Telstra.
External IP If you selected PPTP, type the IP address of the
PPTP client as given by your ISP.
If you selected PPPoE, this field is optional, and you
do not have to fill it in unless your ISP has instructed
you to do so.
Obtain IP address
automatically
(using DHCP)
Clear this option if you do not want the Safe@Office
appliance to obtain an IP address automatically
using DHCP.