User's Manual Part 1

Configuring Network Settings
108 Check Point Safe@Office User Guide
Note: The internal network range is defined both by the Safe@Office appliance’s
internal IP address and by the subnet mask.
For example, if the Safe@Office appliance’s internal IP address is 192.168.100.7,
and you set the subnet mask to 255.255.255.0, the network’s IP address range will
be 192.168.100.1 – 192.168.100.254.
The default internal network range is 192.168.10.*.
5. Click Apply.
A warning message appears.
6. Click OK.
• The Safe@Office appliance's internal IP address and/or the internal
network range are changed.
• A success message appears.
7. Do one of the following:
• If your computer is configured to obtain its IP address automatically
(using DHCP), and the Safe@Office DHCP server is enabled, restart your
computer.
Your computer obtains an IP address in the new range.
• Otherwise, manually reconfigure your computer to use the new
address range using the TCP/IP settings. For information on configuring
TCP/IP, see TCP/IP Settings on page 26, on page 22.